Ultimate Combo Pack for 5 Flashes

This Ultimate Combo Pack contains 5 sets of all the gels from the Color Correction and Special Effects Packs and enough Velcro to attach all the gels to 5 Speedlight Flashes.

These gels are cut to 2" x 5" and are used to change the color temperature of your flash to match various sources of light.

CTO (Color Change Orange) gels are used to decrease the color temperature of your flash to match tungsten and incandescent lighting.
CTB (Color Change Blue) gels are used to increase the color temperature of your flash to match overcast lighting outdoors.
Plusgreen (Window Green) gels are used to match fluorescent lighting. Since fluorescent bulbs vary in the amount of green they emit, you will want to try the various strengths of Plusgreen gels to see what works best.
Neutral Density gels are used to reduce the power of light from your flash.
Use the other colored gels to create different colors of light in your photos.

This gel pack contains 5 each of the following Rosco gels and Velcro adhesive for 5 flashes:

Color Correction Gels
Full CTO (converts 5500K to 2900K)
1/2 CTO (converts 5500K to 3800K)
1/4 CTO (converts 5500K to 4500K)
Full CTB (converts 5500K to 7800K)
1/2 CTB (converts 5500K to 6400K)
1/4 CTB (converts 5500K to 5800K)
Full Plusgreen (converts 5500K to roughly match fluorescent)
1/2 Plusgreen (converts 5500K to roughly match fluorescent)
1/4 Plusgreen (converts 5500K to roughly match fluorescent)

Special Effect Gels
1/2 Stop Neutral Density
1 Stop Neutral Density
2 Stop Neutral Density
Red
Primary Green
Yellow
Magenta
Light Blue
Dark Blue

Velcro Adhesive for 5 flashes
Five 7.5" x 3/4" strips of Velcro (soft "Loop" side of Velcro) to stick onto your flash
90 Velcro dots (rough "Hook" side of Velcro) to stick onto the ends of your gels.