Color Correction #1 with Velcro

$14.90  $12.95
Save: 13% off

This item contains our Color Correction #1 with enough Velcro to attach them to one Speedlight Flash.
  • 9 Color Correction Gels to blend your flash with ambient light color temperature (3 strengths each of CTO, CTB and Plusgreen)
  • Velcro to attach the gels to 1 flash


These gels are machine cut at the factory to 2" x 5" which is longer than other gel packs on the market to allow enough room on the sides to attach these with the included velcro dots. Each gel comes with tissue paper backing to prevent scratches in transit and are packaged in clear plastic zip lock bags with a label indicating the gels in the order they come.

CTO (Color Change Orange) gels are used to decrease the color temperature of your flash to match tungsten and incandescent lighting.
This pack contains 3 different strengths of CTO gels (Full, 1/2, and 1/4 strengths).

CTB (Color Change Blue) gels are used to increase the color temperature of your flash to match overcast lighting outdoors.
This pack contains 3 different strengths of CTB gels (Full, 1/2, and 1/4 strengths).

Plusgreen (Window Green) gels are used to match fluorescent lighting. Since fluorescent bulbs vary in the amount of green they emit, you will want to try the various strengths of Plusgreen gels to see what works best.
This pack contains 3 different strengths of Plusgreen gels (Full, 1/2, and 1/4 strengths).


You get 1 each of the following Lee gels for Color Correction:
  • Full CTO (converts 5500K to 2900K) [Lee #204]
  • 1/2 CTO (converts 5500K to 3800K) [Lee #205]
  • 1/4 CTO (converts 5500K to 4500K) [Lee #206]

  • Full CTB (converts 5500K to 7800K) [Lee #201]
  • 1/2 CTB (converts 5500K to 6400K) [Lee #202]
  • 1/4 CTB (converts 5500K to 5800K) [Lee #203]

  • Full PlusGreen (converts to fluorescent) [Lee #244]
  • 1/2 Plusgreen (converts to fluorescent) [Lee #245]
  • 1/4 Plusgreen (converts to fluorescent) [Lee #246]


You get the following Velcro used to attach the Gels:
  • (1) 7.5" x 3/4" Velcro Strip (Soft "Loop" side of Velcro) to stick onto your flash
  • (18) 3/8" Velcro Dots (Rough "Hook" side of Velcro) to stick onto the ends of your gels.

SPEEDLIGHT COMPATIBILITY:

These gels will fit all speedlight flashes from these brands:
  • Nikon: SB-20, SB-24, SB-26, SB-28, SB-80, SB-600, SB-800,SB-900
  • Canon: 430ex, 540ex, 550ex, 580ex (I and II)
  • Yongnuo: All Flashes
  • LumoPro: All Flashes
  • Nissin: All Flashes
  • Vivitar: 283, 285, 285hv
  • Sigma: All Flashes
  • Minolta: All Flashes
  • Metz: All Flashes smaller than 2" in height


Add to Cart:

  • 500 Units in Stock


Customers who bought this product also purchased...


Your IP Address is: 54.162.50.232
Copyright © 2003-2006 Zen Cart. Powered by Zen Cart